RE: Getting a BGP table in to a lab

["Frotzler, Florian" <Florian.Frotzler () one at>]

Hi,

Zebra is outdated, the successor is called quagga (at least on debian)
and is capable of providing most of the vendor C BGP features, though
MD5 autentication is still experimental I think. We used to push a
handful of BGP full feeds on our quagga router and it didn't stumble a
bit. OSPF also works quite well, btw.


Florian

> -----Original Message-----
> From: owner-nanog () merit edu [mailto:owner-nanog () merit edu] On 
> Behalf Of Scott Morris
> Sent: Donnerstag, 21. April 2005 02:50
> To: swm () emanon com; 'Nathan Ward'; nanog () merit edu
> Subject: RE: Getting a BGP table in to a lab
>
>
> Forget part of my reply here...  I thought someone was 
> posting from the CCIE forum stuff I do.  
>
> So disregard the lack-of-caffeine-induced, retarded command 
> about no router being able to support a full feed.  :)
>
> My apologies....
>
> Zebra is still a good idea though!
>
> Scott 
>
> -----Original Message-----
> From: owner-nanog () merit edu [mailto:owner-nanog () merit edu] On 
> Behalf Of Scott Morris
> Sent: Wednesday, April 20, 2005 8:42 PM
> To: 'Nathan Ward'; nanog () merit edu
> Subject: RE: Getting a BGP table in to a lab
>
>
> None of the routers that are tested in the lab are capable of 
> supporting a full BGP feed....
>
> If you just want to play with BGP stuff, you can use Zebra 
> (unix) or go to www.nantech.com and get their BGP4WIN program.
>
> That may help you a bit more.
>
> Scott 
>
> -----Original Message-----
> From: owner-nanog () merit edu [mailto:owner-nanog () merit edu] On 
> Behalf Of Nathan Ward
> Sent: Wednesday, April 20, 2005 8:35 PM
> To: nanog () merit edu
> Subject: Getting a BGP table in to a lab
>
>
> I'm trying to come up with a way to get a full BGP routing 
> table in to my lab.
> I'm not really fussed about keeping it up to date, so a 
> snapshot is fine.
> At the moment, I'm thinking about spending a few hours 
> hacking together a BGP daemon in perl to peer with and record 
> a table from a production router, disconnect, and then start 
> peering with lab routers.
>
> Am I reinventing a wheel here?
>
> --
> Nathan Ward