nanog mailing list archives
Re: L2 - L3 Etherchannel
From: Arie Vayner <arievayner () gmail com>
Date: Wed, 8 Apr 2009 23:17:10 +0300
Yes. On Wed, Apr 8, 2009 at 9:03 PM, Amolak <amolak.singh () gmail com> wrote:
Hi All, Is it possible to create L2 Etherchannel at one end and L3 etherchannel at another end? For Example: SW-1 ==== interface GigabitEthernet1/1 channel-group 1 mode desirable channel-protocol pagp ! interface GigabitEthernet1/2 channel-group 1 mode desirable channel-protocol pagp ! interface Port-channel 1 no ip address switchport switchport access vlan 10 switchport mode access ! int vlan10 ip address 1.1.1.1 255.255.255.252 ! ------------------------------------ SW-2 ==== interface Port-channel 2 ip address 1.1.1.2 255.255.255.252 ! interface GigabitEthernet1/1 no ip address channel-group 2 mode desirable channel-protocol pagp ! interface GigabitEthernet1/2 no ip address channel-group 2 mode desirable channel-protocol pagp ! I don't have a lab to test it, can somebody confirm if the connectivity will work between these devices as per this setup. Thanks, Amolak
Current thread:
- L2 - L3 Etherchannel Amolak (Apr 08)
- Re: L2 - L3 Etherchannel Arie Vayner (Apr 08)
- Re: L2 - L3 Etherchannel Amolak (Apr 09)
- Re: L2 - L3 Etherchannel Arie Vayner (Apr 08)