nanog mailing list archives

Re: Mikrotik RouterBoard and Ubiquiti Networks Routing and Switching Solutions


From: Faisal Imtiaz <faisal () snappytelecom net>
Date: Tue, 12 Aug 2014 00:45:57 +0000 (GMT)

Should we say, both products are an acquired taste ?

:)

Are they perfect, no, but then what is ?
Do they do the Job, yes.
Do they work well ? yes.
Do they do everything under the sun ? No... but then what does ?
Each has it's own set of peculiarities.

However, what actually sets them apart from everything else is, their power consumption, Environmental Tolerance, 
performance and flexibility.

While they are not Consumer Grade devices, and definitely need a fair amount of Network/Routing/Tech knowledge to 
configure and deploy properly,  some will argue that they are not Carrier Grade Either..

However they are a great 'tool' in a service provider's network.
When used properly, and configured properly, they provide a un-comparable advantage vs most other alternatives in the 
market place.

To use them, and deploy them widely, one has to feel comfortable is dealing with 'perceived opensource' products and 
deal with "you cannot have an immediate fix for your problem ".

Once you get comfortable in understanding the nature of the hardware / software platform along with the choices 
available, it is hard to justify purpose built appliances which carry a hefty price tag ( which is typically justified 
/ justifiable by the amount of hand-holding / support / and dumbed down configuration interface included with them).

We consider these devices to be a good combination of open-source software with reliable, mass produced hardware, 
without a large price tag..


Regards 


Faisal Imtiaz
Snappy Internet & Telecom
7266 SW 48 Street
Miami, FL 33155
Tel: 305 663 5518 x 232

Help-desk: (305)663-5518 Option 2 or Email: Support () Snappytelecom net 

----- Original Message -----
From: "Colton Conor" <colton.conor () gmail com>
To: "NANOG" <nanog () nanog org>
Sent: Monday, August 11, 2014 8:22:05 PM
Subject: Mikrotik RouterBoard and Ubiquiti Networks Routing and Switching Solutions

I am interested to hear opinions on Mikrotik and Ubiquiti Networks routing
and switching products. I know both hardware providers are widely deployed
in WISP networks, but I am less interested in their wireless solutions and
more in their wired products.

I know most of their switches and routers are software based, but that
might not necessarily be a bad thing since everyone is going to SDN
anyways. Their products are 1/10th or less of the cost of
the equivalent Cisco/Juniper products.

How stable and feature rich are both of their platforms? How do both of
their command line interfaces compare to Cisco or Juniper? Is it easy to
train a Cisco tech how to use a Mikrotik or Ubiquiti Networks product?


*Ubiquiti Networks software is based on a version of Vyatta I believe. As
many of you know Vyatta was bought by Brocade. I have heard that Vyatta is
very Juniper OS like. *Ubiquiti just release a line of switches that have
an amazing price and seem to support wire speed switching. Their EdgeRouter
is supposedly faster than Mikrotiks solutions. They are also traded on the
stock market, and seem to be doing well as a company.
http://www.ubnt.com/products/

Mikrotik also seems to make routers and switches. I am not sure what their
software is based on, but it does support advanced features such as MPLS.
Not sure about their switches, but they seem to be dirt cheap! What is
their command line interface like? I couldn't find any financial
information on this company, but they seem to be located in Latvia?
http://routerboard.com/

Does anyone have any meaningful insight to both companies? Why haven't they
made a dent in the switching and router market with their amazing price
points? Am I missing something here?



Current thread: