Re: Brocade CER MPLS

[Brandon Martin <lists.nanog () monmotha net>]

On 11/13/19 3:24 PM, Fawcett, Nick via NANOG wrote:
> I have one CER (let’s call him Charlie) that is not able to build an LSP 
> tunnel to another CER.  Shows “Currently found no route. Will schedule 
> for retry”.  Both CER’s can ping and traceroute each other.  When I had 
> the LSP to the destination router (Snoopy) it adds the LSP and shows UP 
> in status field.  Both have the same number of routes in their ospf 
> table.  Charlie has other LSP’s built to other CER’s on the network with 
> productive VLL’s and VPLS’s.  I have removed both lsp’s from both 
> Charlie and Snoopy and re-added them and only one Snoopy’s LSP comes 
> up.  Any ideas?

What's your CAM profile set to?  Or, if you don't have one, do you have 
any MPLS stuff specified as system-max?  NetIron does, uh, "bad things" 
if it thinks it's out of CAM space for a given type of entry.

There's also fairly extensive MPLS debugging under "debug mpls ..." that 
might prove useful.

If you don't need traffic engineering at all, you might be able to shut 
off "traffic-eng ospf" at which point you'll just get total best-effort 
LDP over IP using next-hop IP connectivity (regardless of how that 
connectivity is signaled) only AFAIK.  It's braindead simple which is 
handy if you're having problems and don't need anything more.
--
Brandon Martin