nanog mailing list archives
Re: Hi-Rise Building Fiber Suggestions
From: Filip Hruska <fhr () fhrnet eu>
Date: Wed, 26 Feb 2020 17:43:40 +0100
It really depends on what you're interconnecting. Some NICs don't support SM optics, so even if you would like to run SM everywhere, it's not necessarily possible depending on the equipment. For example, I had issues with some SolarFlare cards which happily take 10G-SR MM but won't take 10G-LR SM. Filip On 26 February 2020 5:30:56 pm GMT+01:00, Warren Kumari <warren () kumari net> wrote:
On Wed, Feb 26, 2020 at 11:20 AM Coy Hile <coy.hile () coyhile com> wrote:On 2020-02-26 11:14, Randy Bush wrote:We use plenty of multi-mode, but only in the data centre, betweenourown kit, for racks within the same cage.so you have to stock both single and multi? hmmm randyI'd expect that from the ToR -> Servers would be MMF, but that other infrastructure cabling would be SMF. Even using aftermarket optics, putting single-mode transceivers ineveryserver and access port would quickly become cost-prohibitive, woulditnot?Cisco GLC-SX-MM Compatible 1000BASE-SX SFP 850nm 550m DOM Transceiver Module - $6.00 - https://www.fs.com/products/11774.html Cisco SFP-GE-L Compatible 1000BASE-LX/LH SFP 1310nm 10km DOM Transceiver Module - $7.00 - https://www.fs.com/products/12622.html Yup, it is $1.00 more for SM, and you need 2 per link, but unless you are doing *lots* that's likely not cost-prohibitive. The delta on 10G is a bit more ($21 vs $18), but still not crazy-pants territory... Of course, sometimes you don't have the option of SM - you are connecting some someone else than they only do MM, or you are connecting to a piece of kit which doesn't have replaceable optics, or you have legacy cabling which is MM, or... but, the cost of the optics these days is not really the limiting factor.-- Coy Hile coy.hile () coyhile com-- I don't think the execution is relevant when it was obviously a bad idea in the first place. This is like putting rabid weasels in your pants, and later expressing regret at having chosen those particular rabid weasels and that pair of pants. ---maf
-- Sent from my mobile device. Please excuse my brevity.
Current thread:
- Re: Hi-Rise Building Fiber Suggestions, (continued)
- Re: Hi-Rise Building Fiber Suggestions Ryan Hamel (Feb 25)
- Re: Hi-Rise Building Fiber Suggestions Joel Jaeggli (Feb 25)
- RE: Hi-Rise Building Fiber Suggestions adamv0025 (Feb 26)
- RE: Hi-Rise Building Fiber Suggestions adamv0025 (Feb 26)
- Re: Hi-Rise Building Fiber Suggestions Mike Hammett (Feb 26)
- Re: Hi-Rise Building Fiber Suggestions Baldur Norddahl (Feb 26)
- Re: Hi-Rise Building Fiber Suggestions Mark Tinka (Feb 26)
- Re: Hi-Rise Building Fiber Suggestions Randy Bush (Feb 26)
- Re: Hi-Rise Building Fiber Suggestions Coy Hile (Feb 26)
- Re: Hi-Rise Building Fiber Suggestions Warren Kumari (Feb 26)
- Re: Hi-Rise Building Fiber Suggestions Filip Hruska (Feb 26)
- Re: Hi-Rise Building Fiber Suggestions Brandon Martin (Feb 26)
- Re: Hi-Rise Building Fiber Suggestions Mark Tinka (Feb 26)
- Re: Hi-Rise Building Fiber Suggestions Mark Tinka (Feb 26)
- Re: Hi-Rise Building Fiber Suggestions Mark Tinka (Feb 26)
- Re: Hi-Rise Building Fiber Suggestions Mike Hammett (Feb 26)
- Re: Hi-Rise Building Fiber Suggestions Mark Tinka (Feb 26)
- Re: Hi-Rise Building Fiber Suggestions Mike Hammett (Feb 26)
- Re: Hi-Rise Building Fiber Suggestions Mark Tinka (Feb 26)
- Re: Hi-Rise Building Fiber Suggestions Randy Bush (Feb 26)
- Re: [External] Re: Hi-Rise Building Fiber Suggestions Hunter Fuller (Feb 26)