Re: dhcp script!

[David Fifield <david () bamsoftware com>]

On Tue, Sep 08, 2009 at 03:01:20PM -0400, Walt Scrivens wrote:
> No, it still doesn't do anything, just skips the "Host seems down"  
> message:
>
> *********************
> sh-3.2# nmap -PN -d -sU -p67 --script=dhcp-inform 192.168.1.1
>
> Starting Nmap 5.00 ( http://nmap.org ) at 2009-09-08 14:59 EDT
> --------------- Timing report ---------------
>   hostgroups: min 1, max 100000
>   rtt-timeouts: init 1000, min 100, max 10000
>   max-scan-delay: TCP 1000, UDP 1000, SCTP 1000
>   parallelism: min 0, max 0
>   max-retries: 10, host-timeout: 0
>   min-rate: 0, max-rate: 0
> ---------------------------------------------
> NSE: Loaded 1 scripts for scanning.
> Warning: Unable to open interface vmnet8 -- skipping it.
> Warning: Unable to open interface vmnet1 -- skipping it.
> Initiating ARP Ping Scan at 14:59
> Scanning 192.168.1.1 [1 port]
> Packet capture filter (device en1): arp and ether dst host 00:23:6C: 
> 99:EB:B1
> Completed ARP Ping Scan at 14:59, 0.21s elapsed (1 total hosts)
> Overall sending rates: 9.35 packets / s, 392.89 bytes / s.
> mass_rdns: Using DNS server 208.67.222.222
> mass_rdns: Using DNS server 208.67.220.220
> Read from /usr/local/share/nmap: nmap-services.
> Nmap done: 1 IP address (0 hosts up) scanned in 0.30 seconds
>            Raw packets sent: 2 (84B) | Rcvd: 0 (0B)

Try with -PN --send-ip. Maybe something is up with ARP ping.

David Fifield

_______________________________________________
Sent through the nmap-dev mailing list
http://cgi.insecure.org/mailman/listinfo/nmap-dev
Archived at http://SecLists.Org