Nmap Development mailing list archives
Re: FW: [Bulk] Use of npcap in automation system
From: 食肉大灰兔V5 <hsluoyz () gmail com>
Date: Sat, 9 Jan 2016 11:10:41 +0800
Hi Ferreira, What do you mean by saying "*TCP/IP is not active*"? You mean disabling the connection in ncpa.cpl? And does this issue occur on WinPcap 4.1.3 too or just Npcap's problem? And have you tried latest Npcap 0.05 r4 in https://github.com/nmap/npcap/releases? Cheers, Yang On Fri, Jan 8, 2016 at 7:44 PM, Nuno Antonio Dias Ferreira < nuno.ferreira () efacec com> wrote:
Hi Yang, First of all, sorry about I haven’t give you feedback since October but I was away of this project I couldn’t do any more tests. Now I resumed it and I hope you can help me to put this to work. I’m facing a problem now because pcap_findalldevs does not list network interfaces where TCP/IP is not active. That is absolute necessary for my application because witouht that I can’t open them using pcap_open. Can you help understand why. After that I need to put my app reading and writing in raw in the respective adapters. Here I present a diagram where you can how my app works: [cid:image002.png@01D14A08.797F6180] Basically the physical adapters are the Ethernet ports on my device and they are connected to the exterior network. Once the physical one is good it is responsible to receive packet from the exterior and forward to the virtual and vice versa. Once it falis physical 2 will be responsible for that task. Melhores Cumprimentos / Best Regards Nuno Antonio Dias Ferreira Unidade de Automação de Sistemas de Energia / Power System Automation Unit Efacec Energia, Máquinas e Equipamentos Elétricos, S.A. Phone: 229403363 [EFA Logo] Disclaimer<http://efacec.com/email.jpg> From: 食肉大灰兔V5 [mailto:hsluoyz () gmail com] Sent: 7 de outubro de 2015 09:12 To: Nuno Antonio Dias Ferreira <nuno.ferreira () efacec com<mailto: nuno.ferreira () efacec com>> Subject: Re: [Bulk] Use of npcap in automation system Hi Ferreira, I still didn't quite understand why I failed to reproduce this issue, but this usage corresponds to Microsoft's NDIS_FLAGS_DONT_LOOPBACK flag and it is never well documented. Whatever, this only matters with the NDIS 5's legacy, and we can forget about it. that If I am understanding it right, you want your program not to see the packets sent out by itself, in other words, the sending program is also the receiving program right? If yes, then you can try Npcap 0.05 version at: https://svn.nmap.org/nmap-exp/yang/NPcap-LWF/npcap-nmap-0.05.exe And let me know the result. Actually, this functionality can be easily implemented by Npcap, because the three packet flowing paths: receive, other-send, self-send are totally separated in Npcap, so it's convenient to only restrict the self-send path using flag. Remember: other softwares can still see all possible traffic, for instance, your software disabled the loopback packets using PCAP_OPENFLAGS_NOCAPTURE_LOCAL, then your software no longer sees the self-sent packets, but another software like Wireshark can still see them, because they're not "self" sent. Cheers, Yang On Tue, Oct 6, 2015 at 10:24 PM, Nuno Antonio Dias Ferreira < nuno.ferreira () efacec com<mailto:nuno.ferreira () efacec com>> wrote: Hi, My program is a kind of user space bridge. Basically I have a one physical interface (opened in promiscuous mode and PCAP_OPENFLAG_NOCAPTURE_LOCAL) bridged with one virtual. Every traffic received in the physical interface is forward to the virtual and vice-versa. I already followed the WinPcap’s mailing list and I found that after windows 8 does not support any more PCAP_OPENFLAG_NOCAPTURE_LOCAL due compatibility break with NDIS 5. As you can see in the following extract from their release notes (in bold): Version 4.1.3, 08 mar 13 • Added support for Windows 8 and Server 2012 • Removed the old CACE logo • Bugfixes: • Fixed a bug in the Just-In-Time compiler for BPF filters that could cause an OS crash when dealing with specially crafted LD instructions • The BPF filter validation code was not properly validating division-by-zero DIV instructions. • Known bugs: • Transmitted packets are looped back on Windows 8 even when using the flag PCAP_OPENFLAGS_NOCAPTURE_LOCAL for pcap_open. • pcap_dump_fopen is not supported. What I notice in my application is that all packets sent from my virtual interface no my physical are continuously looped back putting my CPU consumption at 100%. So at this moment I’m looking for an alternative which might actually work. Melhores Cumprimentos / Best Regards Nuno Antonio Dias Ferreira Unidade de Automação de Sistemas de Energia / Power System Automation Unit Efacec Energia, Máquinas e Equipamentos Elétricos, S.A. Phone: 229403363 [EFA Logo] Disclaimer<http://efacec.com/email.jpg> From: 食肉大灰兔V5 [mailto:hsluoyz () gmail com<mailto:hsluoyz () gmail com>] Sent: 5 de outubro de 2015 18:03 To: Gisle Vanem <gvanem () yahoo no<mailto:gvanem () yahoo no>>; Nuno Antonio Dias Ferreira <nuno.ferreira () efacec com<mailto:nuno.ferreira () efacec com>>; Nmap-dev <dev () nmap org<mailto:dev () nmap org>> Subject: Re: [Bulk] Use of npcap in automation system Hi Ferreira, First allow me to paste PCAP_OPENFLAG_NOCAPTURE_LOCAL's description here from winpcap's source: /*! \brief Defines if the local adapter will capture its own generated traffic. This flag tells the underlying capture driver to drop the packets that were sent by itself. This is usefult when building applications like bridges, that should ignore the traffic they just sent. */ #define PCAP_OPENFLAG_NOCAPTURE_LOCAL 8 I have tested the WinPcap 4.1.3's PCAP_OPENFLAG_NOCAPTURE_LOCAL flag of pcap_open against my Win 8.1 x64 VM and Win10 RTM x64 VM. Both conditions work as expected (I mean the packet sender will not receive his sent packets), other WinPcap's clients (like Wireshark) will still see the sent packets, which is also expected according to the explanation above. So I can't reproduce the failure you mentioned, could you provide a sample? For another thing, AFAIK, NDIS 6 is available since Vista, 6.2 for Win7, 6.3 for Win8 ( https://msdn.microsoft.com/en-us/library/windows/hardware/ff567893(v=vs.85).aspx). And there isn't quite much difference of NDIS between Win7 and Win8. /* disable loopback capture if requested */ if(flags & PCAP_OPENFLAG_NOCAPTURE_LOCAL) { if(!PacketSetLoopbackBehavior(fp->adapter, NPF_DISABLE_LOOPBACK)) { snprintf(errbuf, PCAP_ERRBUF_SIZE, "Unable to disable the capture of loopback packets."); pcap_close(fp); return NULL; } } And what Gisle said is iterally right, because PCAP_OPENFLAG_NOCAPTURE_LOCAL flag is just implemented by PacketSetLoopbackBehavior (adapter, 1), so these two ways are totally identical. pcap_open() is not standard API but I don't think this is your problem. Cheers, Yang On Mon, Oct 5, 2015 at 4:46 PM, Gisle Vanem <gvanem () yahoo no<mailto: gvanem () yahoo no>> wrote: Nuno Antonio Dias Ferreira wrote: I am software developer of automation systems. Last year I develop an application to allow network redundancy where I was using WinPcap 4.1.3, that application is running well in Windows XP and Windows 7 but is not working in Windows ( and above because of changes in NDIS 6. In my application I am opening Pcap handler with the flag PCAP_OPENFLAG_NOCAPTURE_LOCAL and that’s the reason why I can’t use my app in Windows 8. Can you tell me if your pcap has this feature implemented? The flag PCAP_OPENFLAG_NOCAPTURE_LOCAL is AFAICS a parameter to 'pcap_open()' which is not present in standard libpcap (unless the REMOTE-stuff is added). But the same feature can be enabled using: PacketSetLoopbackBehavior (adapter, 1); Works fine under Win 8.1. -- --gv _______________________________________________ Sent through the dev mailing list https://nmap.org/mailman/listinfo/dev Archived at http://seclists.org/nmap-dev/ _______________________________________________ Sent through the dev mailing list https://nmap.org/mailman/listinfo/dev Archived at http://seclists.org/nmap-dev/
_______________________________________________ Sent through the dev mailing list https://nmap.org/mailman/listinfo/dev Archived at http://seclists.org/nmap-dev/
Current thread:
- FW: [Bulk] Use of npcap in automation system Nuno Antonio Dias Ferreira (Jan 08)
- Re: FW: [Bulk] Use of npcap in automation system 食肉大灰兔V5 (Jan 08)
- RE: FW: [Bulk] Use of npcap in automation system Nuno Antonio Dias Ferreira (Jan 11)
- Re: FW: [Bulk] Use of npcap in automation system 食肉大灰兔V5 (Jan 11)
- RE: FW: [Bulk] Use of npcap in automation system Nuno Antonio Dias Ferreira (Jan 11)
- Message not available
- RE: Use of npcap in automation system Nuno Antonio Dias Ferreira (Jan 12)
- Re: Use of npcap in automation system 食肉大灰兔V5 (Jan 12)
- RE: Use of npcap in automation system Nuno Antonio Dias Ferreira (Jan 12)
- Re: Use of npcap in automation system 食肉大灰兔V5 (Jan 12)
- RE: Use of npcap in automation system Nuno Antonio Dias Ferreira (Jan 12)
- Re: Use of npcap in automation system 食肉大灰兔V5 (Jan 12)
- RE: Use of npcap in automation system Nuno Antonio Dias Ferreira (Jan 12)
- RE: FW: [Bulk] Use of npcap in automation system Nuno Antonio Dias Ferreira (Jan 11)
- Re: FW: [Bulk] Use of npcap in automation system 食肉大灰兔V5 (Jan 08)