Re: Apply Capture Filter( by Wireshark) not works with Npcap Loopback Adapte

[delete yyj <yyjdelete () 126 com>]

It's strange that it works well today(-｡-;)
I'm not sure if it's an mistake made by me, I will test that and report 
if it happens again.

在 2016/1/22 17:48, 食肉大灰兔V5 <hsluoyz () gmail com> 写道:

   Hi,

   I have tested this with Npcap 0.05 r5, win10 10586 x64 but didn't
   find this issue. Before I find a way to update to 11099, there're
   additional things I want to know. Like is that a x86 or x64 system?
   And have you tried other capture filters, like ip6. Then try ping
   127.0.0.1 and 0::1 to see if the filter works?

   Cheers,
   Yang


   On Thursday, January 21, 2016, yyjdelete () 126 com
   <mailto:yyjdelete () 126 com> <yyjdelete () 126 com
   <mailto:yyjdelete () 126 com>> wrote:

       Tested with
          Npcap 0.05 r5
          Wireshark 2.0.1(v2.0.1-0-g59ea380 from master-2.0)
          Win10(11099)
          Capture Filter: tcp port 80
       Except
          Only get packages which is tcp and use port 80.
       Got
          The same result as no filter was apply(Get All packets).

       But it works with all others adapters.




   _______________________________________________
   Sent through the dev mailing list
   https://nmap.org/mailman/listinfo/dev
   Archived at http://seclists.org/nmap-dev/


_______________________________________________
Sent through the dev mailing list
https://nmap.org/mailman/listinfo/dev
Archived at http://seclists.org/nmap-dev/