Snort mailing list archives
Re: cannot authenticate to MSSQL database from BASE
From: Joel Esler <jesler () sourcefire com>
Date: Sat, 11 Feb 2012 10:22:30 -0500
Any particular reason you are doing such an elaborate set up and not taking the extra step to do it in Linux? -- Joel Esler On Feb 10, 2012, at 10:39 AM, tadios tefera <ttefera () gmail com> wrote:
Due to internal requirements, I have installed WinIDS, using three different servers. SERVER-A has a working snort engine that is able to write to an MS SQL database. SERVER-B is an MS SQL_10 server. MS SQL server is a pre-existing full blown install and was not setup per the direction on Winsnort, but the snort and snort_archive instances were. SERVER-C is an IIS7 Server hosting php, adodb and base. Althought IIS7 was not installed per direction on winsnort, the configuration of base and php were. Michael, thanks for your reminder about using Wordpad, I had been using Notepad and will start the whole thing over using Wordpad. Following that, I will also verify if Billy's suggestion may be a solution to the issue I am having. Thanks, Tad. On Mon, Feb 6, 2012 at 5:44 PM, Michael Steele <michaels () winsnort com> wrote: I think you are so far past what he can do, but maybe not? It was depicted as if he used the install guide from Winsnort.com. If he installed SQL Server for SSL then the SQL Server was not installed as described in the guide. Kindest regards, Michael... WINSNORT.com Management Team Member -- ****************** Established ~ 2001 ******************* * Visit Us @ http://www.winsnort.com * * ~~ FREE WinIDS Snort installation guides ~~ * * ~~ FREE support forums ~~ * * Snort: Open Source Network IDS - http://www.snort.org * ********************************************************* From: Billy Marshall [mailto:Billy.Marshall () state co us] Sent: Monday, February 06, 2012 3:57 PM To: 'tadios tefera'; Michael Steele Cc: snort-users () lists sourceforge net Subject: Re: [Snort-users] cannot authenticate to MSSQL database from BASE Not sure but it starting to sound like a CA certificate issue not an encryption issue. Hope the following helps http://support.microsoft.com/kb/318605 Install the public key in the client server. For the client to request the SSL encryption, the client computer must trust the server certificate and the certificate must already exist on the server. You have to use the MMC snap-in to export the Trusted Root Certification Authority used by the server certificate: 1. To export the server certificate's Trusted Root Certificate Authority (CA), follow these steps: a. Open MMC, and then locate your certificate in the Personal folder. b. Right-click the certificate name, and then click Open. c. Review the Certification Path tab. Note the top most item. d. Navigate to the Trusted Root Certification Authorities folder, and then locate the Certificate Authority noted in step c.. e. Right-click CA, point to All Tasks, and then click Export. f. Select all the defaults, and then save the exported file to your disk where the client computer can access the file. 1. Follow these steps to import the certificate on the client computer: a. Navigate to the client computer by using the MMC snap-in, and then browse to the Trusted Root Certification Authorities folder. b. Right-click the Trusted Root Certification Authorities folder, point to All Tasks, and then click Import."Michael Steele" <michaels () winsnort com> 2/3/2012 8:34 AM >>>Did you use the SQL Server software pack provided on Winsnort.com? Was it installed using the guide on Winsnort.com? Kindest regards, Michael... WINSNORT.com Management Team Member -- ****************** Established ~ 2001 ******************* * Visit Us @ http://www.winsnort.com * * ~~ FREE WinIDS Snort installation guides ~~ * * ~~ FREE support forums ~~ * * Snort: Open Source Network IDS - http://www.snort.org * ********************************************************* From: tadios tefera [mailto:ttefera () gmail com] Sent: Thursday, February 02, 2012 11:12 AM To: Jeremy Hoel Cc: Billy Marshall; snort-users () lists sourceforge net Subject: Re: [Snort-users] cannot authenticate to MSSQL database from BASE Yes, that is what it is showing, it is also several pages long. So does anyone have any suggestions? Is this a bug in the versions I am running? PHP 5.2.17 adodb514 base 1.4.5 Also, in my original question, the MSSQL Server Log shows that a connection is attempted but fails. The connection failure is indicated by the following: "Encryption is required to connect to this server but the client library does not support encryption; the connection has been closed. Please upgrade your client library. [CLIENT: 192.168.15.111]" The specified IP is of the webserver that is hosting base, php and adodb. What client library should I be using? and is there a way to specify encryption in base_config.php or php.ini? On Thu, Feb 2, 2012 at 10:30 AM, Jeremy Hoel <jthoel () gmail com> wrote: When you run that page (test.php) does it display a lot of info about php? If it does, then it's working. From your message it sounds like it's showing "<?php phpinfo(); ?>" IT should show something like this - http://files.zend.com/help/Zend-Core/phpinfo_screen.png On Thu, Feb 2, 2012 at 3:23 PM, tadios tefera <ttefera () gmail com> wrote:How can I confirm php is executing? Per the documentation on Winsnort.com on how to setup snort and Base on Windows, I have followed the test procedure to verify that php is executing. the procedure states, to place a test.php file in c:\inetpub\wwwroot\base. The from a browser to execute test.php by http://ServerName/base/test.php Test.php contains the following: <?php phpinfo(); ?> The outcome on my browser is what is expected per the documentation on Winsnort.com; it is a table showing php version, system, build date, configure command, server api, etc.... Is this not a sufficient way to confirm that php is executing? On Thu, Feb 2, 2012 at 10:04 AM, Jeremy Hoel <jthoel () gmail com> wrote:Err.. sorry. Got cut off at work php is not parsing the file correctly.. it's not being interpreted by the web server. On Thu, Feb 2, 2012 at 3:03 PM, Jeremy Hoel <jthoel () gmail com> wrote:if you just see the text of the php file and not the rendered version, then php isn't executing.. On Wed, Feb 1, 2012 at 10:43 PM, tadios tefera <ttefera () gmail com> wrote:I am new to php and base... How exactly should I be using this test? If I save it as testing.php in the c:\inetpub\wwwroot\base, and attempt to run it from a browser by http://ServerName/base/testing.php, i just get the text content of the testing.php displayed in the browser. any suggestions? On Mon, Jan 30, 2012 at 4:29 PM, Billy Marshall <Billy.Marshall () state co us> wrote:tad, To test MSSQL basic connect using ADOdb is: include('/path/to/set/here/adodb.inc.php'); $db =& ADONewConnection('odbc_mssql'); $dsn = "Driver={SQL Server};Server=localhost;Database=northwind;"; $db->Connect($dsn,'userid','password'); or if you prefer to use the mssql extension (which is limited to mssql 6.5 functionality): $db =& ADONewConnection('mssql'); $db->Execute('localhost', 'userid', 'password', 'northwind');tadios tefera <ttefera () gmail com> 1/26/2012 4:02 PM >>>not sure if my earlier message was delivered.... I have placed the connect.php file you attached in the "base" folder on the IIS server. I have adjusted the authencitation info (password, etc...) for our SQL server: $serverName = "SERVER-B"; $usr="snort"; $pwd="mypassword"; $db="snort"; And then I attempted to test by going to http://SERVER-C/base/connect.php ; this is the reponse I got: "Fatal error: Call to undefined function sqlsrv_connect() in C:\inetpub\wwwroot\base\connect.php on line 11" In my scenario, SERVER-B is the MSSQL server and SERVER-C is the IIS server. Am I using the connect.php DB connection test file as you anticipated? Thanks, Tad. On Mon, Jan 23, 2012 at 1:34 PM, tadios tefera <ttefera () gmail com> wrote:Thank you for your response Michael, I have placed the connect.php file you attached in the "base" folder on the IIS server. I have adjusted the authencitation info (password, etc...) for our SQL server: $serverName = "SERVER-B"; $usr="snort"; $pwd="mypassword"; $db="snort"; And then I attempted to test by going to http://SERVER-C/base/connect.php ; this is the reponse I got: "Fatal error: Call to undefined function sqlsrv_connect() in C:\inetpub\wwwroot\base\connect.php on line 11" In my scenario, SERVER-B is the MSSQL server and SERVER-C is the IIS server. Am I using the connect.php DB connection test file as you anticipated? Thanks, Tad. On Sun, Jan 22, 2012 at 10:19 AM, Michael Steele <michaels () winsnort com> wrote:You might be able to use the attached .php file to test the DB connection and users credentials to the remote MSSQL database. Kindest regards, Michael... WINSNORT.com Management Team Member -- ****************** Established ~ 2001 ******************* * Visit Us @ http://www.winsnort.com * * ~~ FREE WinIDS Snort installation guides ~~ * * ~~ FREE support forums ~~ * * Snort: Open Source Network IDS - http://www.snort.org * ********************************************************* From: tadios tefera [mailto:ttefera () gmail com] Sent: Tuesday, January 17, 2012 11:31 AM To: snort-users () lists sourceforge net Subject: [Snort-users] cannot authenticate to MSSQL database from BASE Hi, I have managed to get Snort 2.9.2 working on Windows 2008 R2 Servers. The generated data from Snort is being placed in an mssql database. My setup is as follows: - Snort on a SERVER-A - Database (MSSQL) on SERVER-B - Web Portal (IIS7) on SERVER-C But I am baffled as to how I can access the Snort data from the database. I have installed and configured base, adodb, and php on IIS7 and all indications are that the installs/configurations are correct. When I access the "base" site from a browser: http://SERVER-C/base , I get the following error: ------------------------------------------ Warning: mssql_connect() [function.mssql-connect]: Unable to connect to server: SERVER-B in C:\WinIDS\adodb\drivers\adodb-mssql.inc.php on line 556 Error connecting to DB : snort@SERVER-B Check the DB connection variables in base_conf.php = $alert_dbname : MySQL database name where the alerts are stored = $alert_host : host where the database is stored = $alert_port : port where the database is stored = $alert_user : username into the database = $alert_password : password for the username ------------------------------------------ I have verified numberous times that the dbname, host, port, user and password information are entered correctly in the base_conf.php file. I have also tried changing hostname with IP and resetting the password on the database instance with no luck. I looked into the SQL server logs and it shows encryption is required for this communication. The exact error message in the mssql logs is: "Encryption is required to connect to this server but the client library does not support encryption; the connection has been closed. Please upgrade your client library. [CLIENT: 192.168.15.111]" Client with IP 192.168.15.111 is SERVER-C. My question is, how do I configure authentication encryption to access this database from Base? Thanks, Tad.------------------------------------------------------------------------------ Keep Your Developer Skills Current with LearnDevNow! The most comprehensive online learning library for Microsoft developers is just $99.99! Visual Studio, SharePoint, SQL - plus HTML5, CSS3, MVC3, Metro Style Apps, more. Free future releases when you subscribe now! http://p.sf.net/sfu/learndevnow-d2d _______________________________________________ Snort-users mailing list Snort-users () lists sourceforge net Go to this URL to change user options or unsubscribe: https://lists.sourceforge.net/lists/listinfo/snort-users Snort-users list archive: http://www.geocrawler.com/redir-sf.php3?list=snort-users Please visit http://blog.snort.org to stay current on all the latest Snort news!------------------------------------------------------------------------------ Virtualization & Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/ _______________________________________________ Snort-users mailing list Snort-users () lists sourceforge net Go to this URL to change user options or unsubscribe: https://lists.sourceforge.net/lists/listinfo/snort-users Snort-users list archive: http://www.geocrawler.com/redir-sf.php3?list=snort-users Please visit http://blog.snort.org to stay current on all the latest Snort news!
------------------------------------------------------------------------------ Virtualization & Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/
_______________________________________________ Snort-users mailing list Snort-users () lists sourceforge net Go to this URL to change user options or unsubscribe: https://lists.sourceforge.net/lists/listinfo/snort-users Snort-users list archive: http://www.geocrawler.com/redir-sf.php3?list=snort-users Please visit http://blog.snort.org to stay current on all the latest Snort news!
Current thread:
- Re: cannot authenticate to MSSQL database from BASE, (continued)
- Re: cannot authenticate to MSSQL database from BASE Jeremy Hoel (Feb 02)
- Re: cannot authenticate to MSSQL database from BASE Jeremy Hoel (Feb 02)
- Re: cannot authenticate to MSSQL database from BASE Michael Steele (Feb 02)
- Re: cannot authenticate to MSSQL database from BASE tadios tefera (Feb 03)
- Re: cannot authenticate to MSSQL database from BASE Jeremy Hoel (Feb 02)
- Re: cannot authenticate to MSSQL database from BASE tadios tefera (Feb 03)
- Re: cannot authenticate to MSSQL database from BASE Michael Steele (Feb 03)
- Re: cannot authenticate to MSSQL database from BASE Billy Marshall (Feb 06)
- Re: cannot authenticate to MSSQL database from BASE Michael Steele (Feb 06)
- Message not available
- Re: cannot authenticate to MSSQL database from BASE tadios tefera (Feb 11)
- Re: cannot authenticate to MSSQL database from BASE Joel Esler (Feb 11)
- Re: cannot authenticate to MSSQL database from BASE Michael Steele (Feb 11)
- Re: cannot authenticate to MSSQL database from BASE Joel Esler (Feb 11)
- Re: cannot authenticate to MSSQL database from BASE Michael Steele (Feb 03)
- Re: cannot authenticate to MSSQL database from BASE waldo kitty (Feb 03)