Bugtraq mailing list archives
SGI arrayd default security configuration
From: agent99 () BOYTOY CSD SGI COM (SGI Security Coordinator)
Date: Mon, 19 Jul 1999 11:27:56 -0700
-----BEGIN PGP SIGNED MESSAGE-----
______________________________________________________________________________
SGI Security Advisory
Title: SGI arrayd default security configuration
Number: 19990701-01-P
Date: July 19, 1999
______________________________________________________________________________
SGI provides this information freely to the SGI user community for its
consideration, interpretation, implementation and use. SGI recommends
that this information be acted upon as soon as possible.
SGI provides the information in this Security Advisory on an "AS-IS" basis
only, and disclaims all warranties with respect thereto, express, implied
or otherwise, including, without limitation, any warranty of merchantability
or fitness for a particular purpose. In no event shall SGI be liable for
any loss of profits, loss of business, loss of data or for any indirect,
special, exemplary, incidental or consequential damages of any kind arising
from your use of, failure to use or improper use of any of the instructions
or information in this Security Advisory.
______________________________________________________________________________
+---------------------+
|-- Issue Specifics --|
+---------------------+
The SGI Array Services provide a mechanism to simplify administering
and managing an array of clustered systems. The arrayd(1m) program is part
of the array_services(5) and is known as the array services daemon.
Unfortunately, the default security configuration of arrayd from
array.auth(4) does not provide adequate protection against attack when the
array of clustered systems are placed on an untrusted network. For example,
if the systems are placed on the Internet without a firewall, there is a
possible root compromise of all clustered systems in the array when the
default array.auth configuration is used.
SGI has investigated the issue and recommends the following steps for
neutralizing the exposure. It is HIGHLY RECOMMENDED that these measures
be implemented on ALL vulnerable SGI systems. This issue will be
corrected in future releases of UNICOS and the IRIX applications CD.
+------------+
|-- Impact --|
+------------+
On IRIX, the SGI Array services consists of an inst image called arraysvcs.
The arraysvcs inst image is installed by default on IRIX 6.4-6.5.4 from the
IRIX Applications CD and available as an optional product for IRIX 6.2-6.3.
All sites using array services on UNICOS 9.0 or later are vulnerable.
Array services are not supported on UNICOS/mk, so it is not vulnerable.
The default arrayd.auth configuration file has authentication disabled.
A local user account on the vulnerable array is not required in order to
exploit the arrayd daemon. The arrayd daemon can be exploited remotely over
an untrusted network.
The arrayd vulnerability can lead to a root compromise on an untrusted
network if the array services are running and the arrayd.auth configuration
file has not been changed to enable authentication.
It is believed that this vulnerability in arrayd has not been publicly
discussed outside of SGI.
+------------------------+
|-- Temporary Solution --|
+------------------------+
The steps below can be used to either 1) remove the vulnerability by
removing the Array Services if they are not being used or 2) enable
authorization using a appropriately setup arrayd.auth(4) configuration
file.
+-+-+-+-+
|I R I X|
+-+-+-+-+
1) Become the root user on the system.
% /bin/su -
Password:
#
2) Check to see if the system is running the SGI Array Services.
# chkconfig
Flag State
==== =====
array off
If the Array Services are disabled, the system is not vulnerable
to the arrayd vulnerability.
If required, the arraysvcs inst image can be removed using
following command:
=================
**** WARNING ****
=================
This will completely remove the SGI Array Services programs
# versions remove arraysvcs
3) Edit the default arrayd.auth file to enable authentication.
# vi /usr/lib/array/arrayd.auth
4) Comment out authentication entry in the arrayd.auth file.
This will enable SIMPLE authentication.
# AUTHENTICATION NONE
5) Configure SIMPLE authentication in the arrayd.auth file
if array services are needed on untrusted networks.
See arraysvcs release notes or arrayd.auth man page for more
information on configuring SIMPLE authentication.
6) Restart the arrayd daemon so that it will read the new configuration
files.
# /etc/init.d/array restart
7) Return to previous level.
# exit
%
+-+-+-+-+-+-+
|U N I C O S|
+-+-+-+-+-+-+
1) Become the root user on the system.
% /bin/su -
Password:
#
2) Edit the default arrayd.auth file to enable authentication.
# vi /usr/lib/array/arrayd.auth
3) Replace AUTH NONE entry with AUTH SIMPLE in the arrayd.auth file.
This will enable SIMPLE authentication.
Find
AUTH NONE
Replace with
AUTH SIMPLE
4) Configure SIMPLE authentication in the arrayd.auth file
if array services are needed on untrusted networks.
See arrayd.auth man page for more
information on configuring SIMPLE authentication.
5) Restart the arrayd daemon so that it will read the new configuration
files.
# /etc/init.d/array restart
6) Return to previous level.
# exit
%
+--------------+
|-- Solution --|
+--------------+
+-+-+-+-+
|I R I X|
+-+-+-+-+
On IRIX, the Array Services security issue is scheduled to be fixed in the
next release of the IRIX applications CD.
OS Version Vulnerable? Patch # Other Actions
---------- ----------- ------- -------------
IRIX 3.x-5.X no Note 1
IRIX 6.0.x no Note 1
IRIX 6.1 no Note 1
IRIX 6.2 yes not avail Note 2 & 3
IRIX 6.3 yes not avail Note 1 & 3
IRIX 6.4 yes not avail Note 1 & 3
IRIX 6.5 yes not avail Note 3 & 4
IRIX 6.5.1 yes not avail Note 3 & 4
IRIX 6.5.2 yes not avail Note 3 & 4
IRIX 6.5.3 yes not avail Note 3 & 4
IRIX 6.5.4 yes not avail Note 3 & 4
NOTES
1) This version of the IRIX operating system has retired.
Upgrade to currently supported IRIX operating system.
See http://support.sgi.com/news/irix2.html for more information.
2) This version of the IRIX operating system is in maintenance mode.
See http://support.sgi.com/news/irix1.html for more information.
3) See "Temporary Solution" section.
4) If you have not received an IRIX 6.5.X CD for IRIX 6.5, contact your
SGI Support Provider or download the IRIX 6.5.X Maintenance Release
Stream from http://support.sgi.com/ or
ftp://support.sgi.com/support/relstream/
+-+-+-+-+-+-+
|U N I C O S|
+-+-+-+-+-+-+
OS Versions Vulnerable? Other Actions
----------- ----------- -------------
UNICOS /mk No
UNICOS 9.0.X.X Yes Note 1
UNICOS 10.0 Yes Note 1
UNICOS 10.0.0.1 Yes Note 1
UNICOS 10.0.0.2 Yes Note 1
UNICOS 10.0.0.3 Yes Note 1
UNICOS 10.0.0.4 Yes Note 1
UNICOS 10.0.0.5 Yes Note 1
UNICOS 10.0.0.6 Yes Note 1
NOTES
1) See "Temporary Solution" section.
+----------------------+
|-- Acknowledgments ---|
+----------------------+
SGI wishes to thank the CERT Coordination Center and Yuri Volobuev
for their assistance in this matter.
+---------------------------------------+
|-- SGI Security Information/Contacts --|
+---------------------------------------+
If there are questions about this document, email can be sent to
cse-security-alert () sgi com.
------oOo------
SGI provides security information and patches for use by the entire SGI
community. This information is freely available to any person needing
the information and is available via anonymous FTP and the Web.
The primary SGI anonymous FTP site for security information and patches
is sgigate.sgi.com (204.94.209.1). Security information and patches
are located under the directories ~ftp/security and ~ftp/patches,
respectively. The SGI Security Headquarters Web page is accessible at
the URL http://www.sgi.com/Support/security/security.html.
For issues with the patches on the FTP sites, email can be sent to
cse-security-alert () sgi com.
For assistance obtaining or working with security patches, please
contact your SGI support provider.
------oOo------
SGI provides a free security mailing list service called wiretap and
encourages interested parties to self-subscribe to receive (via email) all
SGI Security Advisories when they are released. Subscribing to the mailing
list can be done via the Web (http://www.sgi.com/Support/security/wiretap.html)
or by sending email to SGI as outlined below.
% mail wiretap-request () sgi com
subscribe wiretap <YourEmailAddress>
end
^d
In the example above, <YourEmailAddress> is the email address that you
wish the mailing list information sent to. The word end must be on a
separate line to indicate the end of the body of the message. The
control-d (^d) is used to indicate to the mail program that you are
finished composing the mail message.
------oOo------
SGI provides a comprehensive customer World Wide Web site. This site is
located at http://www.sgi.com/Support/security/security.html.
------oOo------
For reporting *NEW* SGI security issues, email can be sent to
security-alert () sgi com or contact your SGI support provider. A
support contract is not required for submitting a security report.
______________________________________________________________________________
This information is provided freely to all interested parties
and may be redistributed provided that it is not altered in any
way, SGI is appropriately credited and the document retains and
includes its valid PGP signature.
-----BEGIN PGP SIGNATURE-----
Version: 2.6.2
iQCVAwUBN5NqFbQ4cFApAP75AQGg0wP/SSPH0YNxTagKfj0ox29N6bvIkMOxJ/3j
poT04GVmpnBwThU3dlPArErQxOp+XUkwjcENY8qUlp7Vc0S/OViB3kawPOa6byaD
pJQ54wO5zzG/cTl6IsljxV8MKnXMOFQ90dWDcMJHyhyjzCvPgwlWs+dYVPNlTWMJ
xd8rAuUHrXo=
=KGAX
-----END PGP SIGNATURE-----
Current thread:
- SGI arrayd default security configuration SGI Security Coordinator (Jul 19)