Re: Equipment Supporting 2.5gbps and 5gbps

["Paul S." <contact () winterei se>]

>> I would kill for a 24-port 10GbE Juniper switch for ~$2,500. You 
can't even get a 24-port 1GbE for that.

EX4200s are abundant for much less in Ebay (for the 24port 1g requirement).

In the 10G space though, indeed, Juniper is expensive.

On 1/30/2016 05:03 PM, Jonas Bjork wrote:
> Dear Mr. Carpenter,
>
> Juniper is expensive. If you buy a new 48 x 10GbE/SFP+ fiberswitch from an H3C based vendor like Huawei, you get the 
> whole unit for $10,000. All you need in addition to that are the lasers and these will set you back a hundred bucks per 
> port in case you select 1310nm SFP+ modules (SMF 80km duplex), rendering a total price of less than $300 per interface,
>
> Best regards,
>
> Jonas Bjork
> ISP Senior Network Engineer
>
>
> > On 28 Jan 2016, at 19:35, Mike <mike-nanog () tiedyenetworks com> wrote:
> >
> >
> >
> > > On 01/28/2016 10:29 AM, Randy Carpenter wrote:
> > > I'd love to know what model Juniper you are getting for $102 per 10GbE port and where you are getting it. The lowest-end 
> > > 10GbE switch is the EX4600, which lists at more like $850 per port. You can get higher-end ones with much larger port counts and 
> > > get the cost/port down to about half that, but I can't imagine what you could be talking about for $102/port.
> > >
> > > I would kill for a 24-port 10GbE Juniper switch for ~$2,500. You can't even get a 24-port 1GbE for that.
> > +1, me too!