Snort mailing list archives
darpa dataset problem(zero alert)
From: mehdi maleki <mehdimlk2003 () yahoo com>
Date: Wed, 6 Aug 2014 03:42:43 -0700
I’ve read faq but there is any solution for my problem. I’ve used registered user rule set. my command line and part of output and config-file are as below: ./snort -A fast -r /home/mahdi/darpa/inside.tcpdump -u snort -g snort -c /etc/snort/snort.conf -l /var/log/snort --pcap-show -k none =============================================================================== Packet I/O Totals: Received: 1337777 Analyzed: 1337777 (100.000%) Dropped: 0 ( 0.000%) Filtered: 0 ( 0.000%) Outstanding: 0 ( 0.000%) Injected: 0 =============================================================================== Breakdown by protocol (includes rebuilt packets): Eth: 1340992 (100.000%) VLAN: 0 ( 0.000%) IP4: 1266758 ( 94.464%) Frag: 241 ( 0.018%) ICMP: 1341 ( 0.100%) UDP: 17029 ( 1.270%) TCP: 1248147 ( 93.076%) ============================================================== Action Stats: Alerts: 0 ( 0.000%) Logged: 0 ( 0.000%) Passed: 0 ( 0.000%) Limits: Match: 0 Queue: 0 Log: 0 Event: 0 Alert: 0 Verdicts: Allow: 1276213 ( 95.398%) Block: 0 ( 0.000%) Replace: 0 ( 0.000%) Whitelist: 61564 ( 4.602%) Blacklist: 0 ( 0.000%) part of config-file: # Setup the network addresses you are protecting ipvar HOME_NET any # Set up the external network addresses. Leave as "any" in most situations ipvar EXTERNAL_NET any # List of DNS servers on your network ipvar DNS_SERVERS $HOME_NET # List of SMTP servers on your network ipvar SMTP_SERVERS $HOME_NET # List of web servers on your network ipvar HTTP_SERVERS $HOME_NET # List of sql servers on your network ipvar SQL_SERVERS $HOME_NET # List of telnet servers on your network ipvar TELNET_SERVERS $HOME_NET # List of ssh servers on your network ipvar SSH_SERVERS $HOME_NET # List of ftp servers on your network ipvar FTP_SERVERS $HOME_NET # List of sip servers on your network ipvar SIP_SERVERS $HOME_NET # List of ports you run web servers on portvar HTTP_PORTS [36,80,81,82,83,84,85,86,87,88,89,90,311,383,555,591,593,631,801,808,818,901,972,1158,1220,1414,1533,1741,1830,1942,2231,2301,2381,2809,2980,3029,3037,3057,3128,3443,3702,4000,4343,4848,5000,5117,5250,5600,6080,6173,6988,7000,7001,7071,7144,7145,7510,7770,7777,7778,7779,8000,8008,8014,8028,8080,8081,8082,8085,8088,8090,8118,8123,8180,8181,8222,8243,8280,8300,8333,8344,8500,8509,8800,8888,8899,8983,9000,9060,9080,9090,9091,9111,9290,9443,9999,10000,11371,12601,13014,15489,29991,33300,34412,34443,34444,41080,44449,50000,50002,51423,53331,55252,55555,56712] # List of ports you want to look for SHELLCODE on. portvar SHELLCODE_PORTS !80 # List of ports you might see oracle attacks on portvar ORACLE_PORTS 1024: # List of ports you want to look for SSH connections on: portvar SSH_PORTS 22 # List of ports you run ftp servers on portvar FTP_PORTS [21,2100,3535] # List of ports you run SIP servers on portvar SIP_PORTS [5060,5061,5600] # List of file data ports for file inspection portvar FILE_DATA_PORTS [$HTTP_PORTS,110,143] # List of GTP ports for GTP preprocessor portvar GTP_PORTS [2123,2152,3386] # other variables, these should not be modified ipvar AIM_SERVERS [64.12.24.0/23,64.12.28.0/23,64.12.161.0/24,64.12.163.0/24,64.12.200.0/24,205.188.3.0/24,205.188.5.0/24,205.188.7.0/24,205.188.9.0/24,205.188.153.0/24,205.188.179.0/24,205.188.248.0/24] # Path to your rules files (this can be a relative path) # Note for Windows users: You are advised to make this an absolute path, # such as: c:\snort\rules var RULE_PATH /etc/snort/rules var SO_RULE_PATH /etc/snort/so_rules var PREPROC_RULE_PATH /etc/snort/preproc_rules # If you are using reputation preprocessor set these var WHITE_LIST_PATH /etc/snort/rules var BLACK_LIST_PATH /etc/snort/rules ################################################### # Step #2: Configure the decoder. For more information, see README.decode ################################################### # Stop generic decode events: config disable_decode_alerts # Stop Alerts on experimental TCP options config disable_tcpopt_experimental_alerts # Stop Alerts on obsolete TCP options config disable_tcpopt_obsolete_alerts # Stop Alerts on T/TCP alerts config disable_tcpopt_ttcp_alerts # Stop Alerts on all other TCPOption type events: config disable_tcpopt_alerts # Stop Alerts on invalid ip options config disable_ipopt_alerts # Alert if value in length field (IP, TCP, UDP) is greater th elength of the packet # config enable_decode_oversized_alerts # Same as above, but drop packet if in Inline mode (requires enable_decode_oversized_alerts) # config enable_decode_oversized_drops # Configure IP / TCP checksum mode config checksum_mode: all # Configure maximum number of flowbit references. For more information, see README.flowbits # config flowbits_size: 64 # Configure ports to ignore # config ignore_ports: tcp 21 6667:6671 1356 # config ignore_ports: udp 1:17 53 # Configure active response for non inline operation. For more information, see REAMDE.active # config response: eth0 attempts 2 # Configure DAQ related options for inline operation. For more information, see README.daq # # config daq: <type> # config daq_dir: <dir> # config daq_mode: <mode> # config daq_var: <var> # # <type> ::= pcap | afpacket | dump | nfq | ipq | ipfw # <mode> ::= read-file | passive | inline # <var> ::= arbitrary <name>=<value passed to DAQ # <dir> ::= path as to where to look for DAQ module so's # Configure specific UID and GID to run snort as after dropping privs. For more information see snort -h command line options # # config set_gid: # config set_uid: # Configure default snaplen. Snort defaults to MTU of in use interface. For more information see README # # config snaplen: # # Configure default bpf_file to use for filtering what traffic reaches snort. For more information see snort -h command line options (-F) # # config bpf_file: # # Configure default log directory for snort to log to. For more information see snort -h command line options (-l) # # config logdir: ################################################### # Step #3: Configure the base detection engine. For more information, see README.decode ################################################### # Configure PCRE match limitations config pcre_match_limit: 3500 config pcre_match_limit_recursion: 1500 # Configure the detection engine See the Snort Manual, Configuring Snort - Includes - Config config detection: search-method ac-split search-optimize max-pattern-len 20 # Configure the event queue. For more information, see README.event_queue config event_queue: max_queue 8 log 5 order_events content_length
------------------------------------------------------------------------------ Infragistics Professional Build stunning WinForms apps today! Reboot your WinForms applications with our WinForms controls. Build a bridge from your legacy apps to the future. http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk
_______________________________________________ Snort-users mailing list Snort-users () lists sourceforge net Go to this URL to change user options or unsubscribe: https://lists.sourceforge.net/lists/listinfo/snort-users Snort-users list archive: http://sourceforge.net/mailarchive/forum.php?forum_name=snort-users Please visit http://blog.snort.org to stay current on all the latest Snort news!
Current thread:
- darpa dataset problem(zero alert) mehdi maleki (Aug 05)
- Re: darpa dataset problem(zero alert) waldo kitty (Aug 05)
- <Possible follow-ups>
- darpa dataset problem(zero alert) mehdi maleki (Aug 06)
- Message not available
- Message not available
- Fw: re: darpa dataset problem(zero alert) mehdi maleki (Aug 06)
- Message not available
- Re: darpa dataset problem(zero alert) Joel Esler (jesler) (Aug 07)
- Re: darpa dataset problem(zero alert) Joel Esler (jesler) (Aug 12)
- Re: darpa dataset problem(zero alert) mehdi maleki (Aug 25)
- Fw: darpa dataset problem(zero alert) mehdi maleki (Aug 25)
- Re: darpa dataset problem(zero alert) Joel Esler (jesler) (Aug 19)
- Re: darpa dataset problem(zero alert) waldo kitty (Aug 19)
- Fw: darpa dataset problem(zero alert) mehdi maleki (Aug 25)
- Re: darpa dataset problem(zero alert) Joel Esler (jesler) (Aug 25)
- Re: darpa dataset problem(zero alert) waldo kitty (Aug 25)