Re: One NIC on public side

["mike () grounded net" <mike () grounded net>]

That's what it was. For some reason, the new system doesn't like the hub and moving the connection to a switch, and 
using port mirroring is working.



On Thu, 13 May 2010 19:58:59 +0200, Boonie wrote:
>  The other option is to attach the hub to the span port and attach the
>  
>  monitor devices from there. You allready have the equipment for that.
>  
>  This does not interfere with the normal trafic and if your monitoring PC is
>  not sending and data (reverse dns queries?) there should also be no
>  collisions.
>  
>  Dave
>  
>  
>  ----- Original Message -----
>  From: <mike () grounded net>
>  To: "wireshark-users" <wireshark-users () wireshark org>
>  Sent: Thursday, May 13, 2010 6:52 PM
>  Subject: Re: [Wireshark-users] One NIC on public side
>  
>  
> >  Are you sure you want tu run all traffic through a hub? This might lead to
> >  packetloss due to colissions.
> >  
>  It's a temporary setup so that we can get a number of services going right.
>  So far, we don't see any packet loss or terrible quality loss and we're even
>  passing voip calls through the setup.
>  We were using a switch with port monitoring but because we had multiple
>  devices which needed to monitor the traffic, we ended up using a hub for
>  now.
>  
>  The setup I'm talking about is...
>  
>  WAN-Routers----Hub----Firewall----switches----etc
>  
>  The wireshark and other monitoring systems are connected to the Hub.
>  
>  ___________________________________________________________________________
>  Sent via:    Wireshark-users mailing list <wireshark-users () wireshark org>
>  Archives:    http://www.wireshark.org/lists/wireshark-users
>  Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
>  mailto:wireshark-users-request () wireshark org?subject=unsubscribe


___________________________________________________________________________
Sent via:    Wireshark-users mailing list <wireshark-users () wireshark org>
Archives:    http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
             mailto:wireshark-users-request () wireshark org?subject=unsubscribe